A wet room provides the functionality of a traditional bathroom, along with the luxury of a tiled area underneath the shower that is much bigger than normal. Would you like to know how much does it cost to install a wet room? Please check our handy price guide…please note 20% off laboure now!
moGio Services specializes in WET ROOMS AND WALK IN SHOWER FITTING
Our shower sets are complete series different performed shower trays and shower kits all manufactures from Wedi boards. All shower trays slope to a central or offset drain, which is supplied as part of the kit, to allow the water to run away. Once installed the wet room kit can be tailed the normal way. The board is installed instead of plasterboard or wooden sheet and is simply screw fixed directly onto wooden stud-work or brick/block work. The boards are all 600 wide so they are easy to handle and where one board abouts another a special tape is used to waterproof the joint. As such a waterproof tank is created so if water does get behind the tiling you won’t find it dripping through your ceiling. These boards can be used to build vanity units, shelves, bath panels, pipe boxing; thicker boards are available 20mm, 30mm, 40mm, 50mm. The board itself is manufactures from a rig extruded polystyrene foam which is finished with glass fibre mesh and cement facing providing an inert stable background ideal for tiling.
Walk-in shower sets used by moGio are complete series different performed shower trays and shower kits all manufactures from Wedi. All shower trays slope to a central or offset drain, which is supplied as part of the kit, to allow the water to run away. Once installed the wet room kit can be tailed the normal way.
These unique tile able units, as well as being eminently practical and reliable, have opened up possibilities for wet rooms and bathroom.
The bases are constructed with a ready-made fall and incorporate a sealed horizontal or vertical drain and are available in the standard range at 90 x 90 cm, 100 x 100cm, 120 x 120 cm, 120 x 90cm, 150 x 150cm, 180 x 90cm
Walk in shower systems are suitable for installation in concrete or rigid suspended wooden floors. The board is installed instead of plasterboard or wooden sheet and is simply screw fixed directly onto wooden stud-work or brick/block work. When used to level uneven walls, it delivers the finished job much faster than rendering or plastering. There is minimum dust even when drilling.
Wedi Building Boards can be easly and quickly constructed using 50mm Building Boards and the appropriate wedisteck accessories. No timber studwork or supporying frame is required. The partition wall system forms the perfect side to Fundo range of floor-level
Wedi boards has a blue Styrofoam™ core. Both sides are coated with a polymer-modified cement coating and reinforced with glass fibre. The boards are all 600 wide so they are easy to handle and where one board about another a special tape is used to waterproof the joint. Wedi board is also a joy to use! – it is lightweight, easy to cut and dimensionally stable. It is supplied in a variety of thicknesses 20mm, 30mm, 40mm, 50mm. The Ewdu boards combines lightness, structural stability, thermal insulation and moisture impermeability. Its surface provides an ideal substrate for thin-bed tile laying on walls and floors or the application of render finishes.
As such a waterproof tank is created so if water does get behind the tiling you won’t find it dripping through your ceiling.
All walk-in showers are supplied with the accessories required for reinforcing and easy fitting and all are suitable for installation in concrete or rigid suspended wooden floors.
Curves and waves
Wedi boards allow creating unusual shapes for you dream shower. Using BA Construct system we can create curved enclosures, bath settings or steps. The exciting new shapes of showers – round, spiral and pentagonal are the logical net stage in development and offer stunning new possibilities for bathroom design. The range of partitioning systems can be also shaped to the various designs and specifications.
Using BA Construct, it is easy to create curved surfaces suitable for tiling.
BA Construct comes in two formats: one with the cuts across the width of the board and the second with the cuts along the length
SPIRAL SHOWERS as well as in domestic wet rooms are very popular in spas, health centers and leisure centers.
The Fundo Spiral has nine parts –the wall in shower base incorporating the drain unit, and the eights part curved partition. The base unit has a groove on its outer edge into which the wall units are slotted. The wall sections themselves are each tongue and groove jointed, and are joined with self-adhesive reinforcement tape. The base is available as left or right hand entrance.
The threshold between the base unit and the adjacent floor at the entrance is sealed
With wedi waterproof tape fixed in a cement based tile adhesive.
The unit can then be tiled with a maximum format 5 x 5cm ceramic or stone tiles.
ROUND WALK-IN SHOWER
Rond shower kit can be installed in standard bathroom areas, as well as in free-standing concepts. The overall diameter is around one metre, so it is possible to have added comfort and style, setting a mood.
Round design is a great example of all-round comfort. It simply transforms a normal shower into a feature and with a diameter of around just one metre can easily fit into most bathrooms. The unit provides the firm supporting structure on which to create the mood and atmosphere that tiles can bring.
Wedi systems provide many interesting and useful solutions for luxurious bathroom and wetrooms. Wedi has developed shower accessories, curbs, niches, benches and seats to be used in conjunction with the wedi building panel and Fundo shower pan to offer the only complete tile ready shower waterproofing system on the market.
Wedi board systems can be used to build vanity units, shelves, bath panels, pipe boxing.
This is more than a surface for tiling onto - it is a construction material that opens up a wealth of creative possibilities on tight budgets.
Anyone today who is looking for load-bearing - designed or designable - possibly waterproof and above all economical to prepare subconstructions for laying tiles or for applying other surfaces, will find a perfected product range at wedi.
This wide collection contains a rich assortment of standard products; however it also provides almost every option imaginable for individual problem solutions in the form of exacting single-piece products.
The board is installed instead of plasterboard or wooden sheet and is simply screw fixed directly onto wooden stud-work or brick/block work. When used to level uneven walls, it delivers the finished job much faster than rendering or plastering. There is minimum dust even when drilling.
Wedi NonStep Plan can be used where the floor surface is slightly uneven, though the floor should be thoroughly cleaned before application.
NonStep Plus delivers a unique combination of impact sound reduction with a completely waterproof substrate, and is especially appropriate in bathrooms and wet areas.
How to describe wet room? How much cost to installSHOWER WITHOUT SHOWER TRAY
Shower without shower tray
Taking a shower not always must associate with standing plastic or glass cabin. You can design your own shower area to fit to your shower room and crate the special and unique shower room. As tiles are the most popular way to finish bathrooms and wet rooms, there is no limit of materials you can use to design it: glass, stone, marble etc.
Wet rooms are the best solution for people who like modern and tidy look. Wet room shower trays can be installed on concrete and wooden floor. The shower trays slope to allow the water drain. The rest of the floor in the room is lifted to create one, even area. Floor prepared in that way can be tiled with any kind if floor tiles.
How much wet room fitting cost?
ESTIMATE of standard size wet room installation:
Remove old tiles from the walls and floor
Disconnect washbasin, WC, shower
Repair damaged walls
Prepare connections for either wet room sloping floor or walk in shower
Plumbing connection for shower head and shower valves
Plumbing connection for new washbasin and toilet
Install wet room tray and aqua panels on the floor
Cover walls in the shower area with aqua panels
Thank area, seal against leaks
Tile all walls from top to the ceiling
Tile a wet room tray and floor
Install washbasin with taps, WC, shower head and valves
Install glass panel
Labour price: £2600.00
Approximately cost of materials £ 800.00
Time of work 14 working days
The Wet Room Tray is underlay sloping floor that defines the "wet area" and allows water to run into the special drain
Trays are available in squares or rectangles with offset drain holes to allow the location of the waste pipe between floor joists. They can be rotated to suit the location, and trimmed by 60 - 70 mm off each edge, or even notched to fit around obstructions (e.g., boxed-in soil pipe). They are easy to fit into a concrete of timber floor.
There are lots of sizes available to fit any size of a room:
800mm x 800mm; 900mm x 900mm; 1000mm x 100mm; 1500mm x 1500mm
1850mm x 900mm; 1500mm x 800mm; 1200mm x800mm; 1200nn x 900mm;
They can be rotated to suit the location, and trimmed by 60 - 70 mm off each edge, or even notched to fit around obstructions (e.g., boxed-in soil pipe). They are easy to fit into a concrete of timber floor.
The wet room kit includes a hidden shower tray with built in falls and waterproof tanking boards which is to be secured using a good quality flexible tile adhesive to the rest of the bathroom. While shower tray and tanking boards are leveled and fixed to the floor, the next stage is for all the joints between the individual tanking boards, walls and hidden tray to be made watertight using the supplied industrial high grab tanking sealing tape. Now the wetroom floor is completely tanked ready for tiling.
Under floor heating can be used with wet room kits and can be an excellent addition to your wet room. Wet room floor heating allows tiles to be heated to a temperature that is comfortable to walk on, and also radiates heat to the room above, raising the air temperature, and allowing wet surfaces to dry more quickly.Under floor heating is luxury and it is wonderful to walk on the warm floor but as most wet rooms will be installed with a heated radiator or towel rail there is no requirement for the underfloor heating to be the primary source of heat in the room, rather you will only require comfort heating where you walk.
If you already have the wet room but your floor is damaged or not properly sealed anymore, we can undertake the renovation only the floor for you.
What is the cost of wet room floor installation?
ESTIMATE of standard size (2m x 2m) wet room floor fitting
Remove existing tiles from the wet room floor
Remove bottom wall tiles around the room
Remove existing sub floor
Prepare plumbing for a new wet room underlay base
Tank the area
Tile the new prepared floor
Tile the bottom line of the wall
Seal the whole area
Labour price: £400.00
Approximately cost of materials
including wet room tray and tanking boards £ 400.00
Wet room can be an efficient use of limited space in a small, existing bathroom, or in a box room, for example, which can be converted to ensuite bathroom. Ensuite bathroom will definitely make your life easier and the same will add value to your property. Wall mounted sinks, and toilets, can be accommodated without compromising the available space. In a wet room the whole of the room effectively becomes a shower what means there is no need for shower tray. That fact gives the room very modern and neat look, and make it easier to maintain.
Even very tiny room, as small as 800 x 800mm can be big enough for the Wet Room! The main consideration is to check that there is sufficient drainage. You should also check that there are no re-inforced steel joists in the way. The Wet Room shower trays come in a large variety of sizes with centre and off centre drains to facilitate drain placement. Wet Rooms should always be fitted by specialists to avoid problems and leaks in the future. Wet room kits are designed to be fitted over timber or concrete floors.
Both types of the sub floor will need waterproofing. If you have a timber floor you need to ensure that the floor is well fixed and rigid. Screw loose floorboards (ensuring you miss any water pipes below). The essential part of a wet room construction is to ensure that the floors and shower area are fully watertight, boards and surfaces are fixed firmly and able to take the weight of the tiles you intend to use.
Do you have an unusual idea?
Mogio Services is able to undertake very uncommon projects and bathroom renovations like that one on the picture above.
Wet Room / Bathroom Installation Estimate:
Remove all wall and floor tiles
Disconnect units, sink and bath
Fit waterproof plaster/aqua boards on the walls where its required
Prepare plumbing connections for Wet room 40mm drain
Prepare plumbing drain for bath, sink
Plumbing supply for free standing taps column hot/cold
Plumbing supply for a separate shower mixer hot/cold, shower head outlet
Lay down wet room sloped floor, get connected
Level the floor; make sure all water if goes outside bath will drain under the bath
Lay down Aqua panels on the floor
Lay down under floor heating, fuse box and controller outside
Fit Free standing bath
Shower above the bath
Tile walls up the ceiling, over the window frame/protect window
Tile floor, cut envelope under bath to divert water to the daring on the middle
Flexible/waterproof adhesive on the floor/walls
Flexible grout floor/walls
Install free standing taps
Install shower mixer, rail, shower head,
Install shower screen glass
Labour cost £2800.00 + materials
Approximately materials cost
(plumbing connections, aqua panels, building materials, adhesive and grout) £ 1200.00
Wet room installation
-Disconnect and remove old units ( bath/shower, WC and washbasin)
-Remove wall tiles and floor
-Plumbing for shower mixer and shower head
-Plumbing for toilet / WC to be moved
-Plumbing for washbasin / washbasin to be moved
-Install wet room floor with slope in shower area
-Install shower drain under the floor
-Apply wet room aqua boards on walls (shower area) and rest of the floor
-Tank shower area - tape and seal floor and walls
-All pipes to be run in the walls
-Tile all walls and floor- all tiles on external corners tiled to 90o
-Fit glass panel
-Install WC, washbasin and accessories
Labour price: £2300.00 - £3500.00
The total price of low budget installation including cost and fitting units, tiling and building materials. Option2: If you want proof that the simplest design is the most beautiful, just look at Playtime walk-in shower enclosures. Their pared down style adds a feeling of space and openness, giving you the most luxurious walk-in shower experience. see furniture brake down -> slide
The total cost of shower and units: £732.00
You can get nice tiles for about £25-£30 sqm
£500- £900 for tiles
Mogio provides £20% trade discount for all TOPPS TILES products
GLASS PANEL starting from around
£250 up to £500
Aqua panels, plumbing parts, adhesive, grout, fixing accessories
Total cost of low budget wet room installation including cost and fitting
all units, tiles, tiling and building materials £4400.00 - £45600.00
WET ROOM SHOWERSare a relatively old concept in parts of Europe, but are becoming extremely popular in London and in the UK.Destined for anybody looking for interior comfort.Wet room floor and walls may be finished of any kind of tiles. A wet room is much more versatile than a shower cubicle or enclosure and give you more control when designing your bathroom. The wet room concept allows the showering area to blend naturally with the rest of the room.
We hope you are convinced now that your new bathroom may be enriched by separated zone of the wet room which is waterproof and completely safe from being flooded. Or service is under guarantee and each quotation is prepared in a reliable way with a great attention to details. We also provide designing services of the wet rooms and walk in showers as the part of the bathroom. Our Resource Center service helps you to organize needed products faster and always we can obtain discount when purchasing through us.
FRAMELESS GLASS SCREENS separate the shower area from the rest of the wet room and present the perfect choice for the contemporary wetroom finish. Specifically designed for use with a wet room shower glass screens bring the add dimension of space and luxury to any bathroom.Wet room tanking is one of our main core of business, we carried three digit installations through London.
OUR SPOTLIGHTSGET STEAMY WITH AQUALUX
As the UK’s leading supplier of bath screens and shower enclosures, Aqualux were on stand to prove that luxury can be affordable as the company unveiled its latest product innovations including design additions to its world- first AquaSpace collection. The AquaSpace range includes Aqualux’s award winning Walk- in with wet room fitting options, spacious Walk- through with additional side panels, the stylish Corner Walk- through, B- Shape Walk- in, Square Walk- in and the stunning, UK first Walk- around.
Aqualux also launched a new range of Tuff- Max® trays, which offer installers and plumbers an extensive collection of shower trays that are quick and simple to fit and maintain. The Tuff- Max range is designed to fit all of the enclosures in the Aqualux collection and provides a comprehensive selection of sizes and shapes.
The rainfall shower
“A rainfall shower gives a softer and more relaxing shower sensation by delivering water at lower pressure or in finer droplets, whilst maintaining a high flow rate- good for relaxing you at the end of a hard day. Some modern showers (including Rainfall showers) can consume large volumes of water and energy to heat it up, which is not very eco- friendly”
“The term ‘rainfall’ shower generally relates to a larger showerhead that delivers a generous pouring like the old- fashioned ‘watering- can’ or ‘rose’ showerheads.
Hansgrohe has a large family of showers called Raindance that range from 10cm diameter hand showers up to 60cm diameter overhead showers. The ‘rain’ connection here also relates to the generously wide spray pattern on all the showers but more importantly to the patented air- injection that gives a natural feel to the spray”
“Rainfall showers offer the user a more natural and organic way of relaxing and washing, creating a feeling of being at one with nature. The bathroom as a whole is becoming more spa- like and so features like ‘rainfallshowers’ are becoming increasingly popular as people are looking to relax and rejuvenate in the comfort of their own home. Rainfall and power showers have different applications, and often, if people have more than one bathroom, both shower types will be present in the home. The rainfall style showers would often be in the pampering, spa- inspired room, while the power shower would fit better in the room the whole family uses.”
“Today’s more sophisticated consumer has a higher expectation and wants the best showering experience, and this includes lots of different options. The rainfall shower is certainly gaining in popularity and also fits in with current lifestyle trends, which are influencing the design of modern bathrooms”, says Jan- Peter Tewes, managing director at Grohe. “Those looking for a more gentle and luxurious experience are likely to choose a rainfall shower; this helps to recreate the sensation of a gentle tropical shower with hundreds of tiny water drops, which soothe the skin for a showering experience that is relaxing and refreshing.”
“The type of shower depends on what the consumer is looking for – space is one factor and the existing plumbing system will also have an effect on what is the best option. Those looking for an invigorating showering experience to relieve stress, tend to choose the jet option. Showers with a jet pattern are perfect for people wanting to easy away muscle tension”
“The term ‘rainfall’ shower generally relates to a larger showerhead that delivers a generous pouring like the old- fashioned ‘watering- can’ or ‘rose’ showerheads. Hansgrohe has a large family of showers called Raindance that range from 10cm diameter hand showers up to 60cm diameter overhead showers. The ‘rain’ connection here also relates to the generously wide spray pattern on all the showers but more importantly to the patented air- injection that gives a natural feel to the spray”
JACOBSEN DESIGNED VOLA
A cylinder, the basis on which Jacobsen designed Vola, is used once again as the starting point for Vola's long awaited high performance ceiling and wall mounted shower heads.
Capable of delivering up to 25 litres per minute, the new showerhead is a much-needed addition to the Vola shower concept fulfilling a strong wish by Vola users for a high-flow cascade style head.
AQVAPLANA is the world's most unique shower panel.
All-Italian design and technology for the shower like you would never have …imagined.
The AQVAPLANA shower panel, completely designed in solid marine Okumè type wood, takes a departure from the mainstream world of sanitary fixtures, which doesn't contemplate the use of wood in direct contact with water for an extended time. The perceptive intuition of creating a shower panel which makes use of wood, normally employed in the building of boats and further protecting it with special marine type varnishes, actually brings the natural warmth and beauty of wood directly into your shower environment, without any problems related to mildew or deterioration.
Available in 6 wood colour variations (Zebrano, Ebony, Wenghe', Teak, Oak and Paduk), AQVAPLANA is the world's most unique shower panel, featuring an ultra-thin frame (5.5 cm at the base and 3.5 cm at the height of the shower head), that is entirely concealed (no connection between the faucet and shower head is visible externally). Yet another special feature of this innovative shower fixture is the possibility of installing it to the floor with a steel upright frame.